Network cable tester

Features:
STP, UTP cable testing
PoE scanning and PSE type identification
Digital / analog signal testing
Measure the cable length and fault distance
For use with IEEE 8023af / at and non-standard PoE switch (5~60V) Identifies AT or AF standards of PSE type
LED backlight: the emitter and the receiver have a backlight function, convenient for working in dark environments
Built-in NCV included in the receiver

Features:
Cable continuity scan: tests open, short, cross etc for STP, UTP cables, wiremap, fault location
Cable length setting: measures LAN cable length, range: 25 m ~ 200 m
PoE testing: POE voltage, power supply polarity, power supply mode, PSE type indicators
Flash function – locates the target network port by the flashing port light on switch/ router Displays connected switch’s information: network speed and protocol etc

Specifications:
Test cable type: CAT5e / CAT6a / CAT6 (STP + UTP)
Power supply: battery 6R22, 9V (not included) and AAA batteries x3 (not included)
Max range (wiremap and scan): 600m
Cable length test range: 25 m ~ 200 m
Cable length accuracy: +/- 16m
Scan max signal voltage 9+/-1V p-p
Scan frequency: 130KHz
Length breakage location: yes
Analog / digital mode: yes
PoE test range: DC 5-60V standard / non-standard PoE switch
PoE voltage display: yes
PSE type: standard: IEEE8023af / IEEE8023at; non-standard
Voltage protection: DC 48V 5mA
LCD display: 128×64 dot-matrix with backlight
Max emitter working current: <150mA
Adjustable sensitivity: yes
AC voltage detecting: yes
Max receiver working current: <100mA
Remote control port: RJ45
Dimensions:
Emitter: 125mmx68mmx28mm
Receiver: 210mmx43mmx27mm
Remote: 65mmx37mmx23mm

Complete set:
Emitter
Receiver
Remote control
Manual and warranty card
Cable adapters set
Headphones
Carry bag

Warranty: 24 months